|
 |
|
|
| Compact 1/2" Condenser Microphone with Detachable Capsule (head) |
|
The RØDE NT6 is specifically designed for difficult mounting applications. Although clearly relevant to instrument miking, the new NT6 is extremely well suited to any situation where a small 'unobtrusive' but powerful microphone system is required.
The 1/2" (externally biased) gold sputtered capsule is designed to attach to a custom made, multi-position swivel mount allowing it to be independently positioned with ease. The capsule is connected to the remote pre-amplifier (body) by a custom 3m Kevlar® fibre reinforced cable.
The surface-mount pre-amplifier circuit also incorporates a two position variable pad: 0 dB and -10 dB attenuation, and a 2-position variable high-pass filter that enables you to step from a flat response to 80Hz high pass filter; both conveniently located away from the capsule, providing additional control without the need to move the capsule once in position.
- Externally biased condenser
- Gold sputtered 1/2" capsule
- Two position PAD - 0dB and -10dB
- Two position High-Pass Filter - flat and 80Hz
- Convenient two-axis swivel mount and 3m Kevlar® fibre reinforced cable included
- Heavy-duty satin-nickel plated body
- Surface mount circuitry
- Low noise and full frequency response
|
| Power |
P48 (48V), P24 (24V) phantom supply |
| Acoustic Principle |
Pressure gradient |
| Directional Pattern |
Cardioid |
| Frequency range |
40Hz-20kHz, selectable HPF @ 80Hz/12dB/octave |
| Output impedance |
200Ω |
| Signal noise ratio |
75 dB SPL (A - weighted per IEC651) |
| Equivalent noise |
19 dB SPL (A - weighted per IEC651) |
| Maximum SPL |
135dB SPL (@ 1kHz, 1% THD into 1KΩ load) (145dB with maximum PAD) |
| Maximum output voltage |
+6dBu (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity |
-37 dB re 1 Volt/Pascal (16 mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Weight |
386gm |
| Dimensions |
188.4mmH x 64mmW x 20mmD |
|
| Reviews | "I have to say that this is another accomplished offering from the Australian manufacturer... sonically it's hard to find fault with this microphone. The combination of diminuitive design smarts, reliability and sonic integrity will no doubt see this microphone become a popular choice in a wide variety of roles." - Audio Technology
"This microphone has plenty of top-end airiness, but it doesn't sound at all harsh. What's more, it goes very deep... The NT6 retains its even and neutral response throughout the frequency range." - MusicTech Magazine
|
|
Included Accessories |
Custom swivel mount, ZP1 zip pouch and WS5 windshield
|
| Optional Accessories |
| GN1 gooseneck, NT45-O Omni capsule, DS1 desk stand and Tripod |
 |  |  |  |
| RØDE NT6 | NT6 with supplied accessories | NT6 capsule head on swivel mount | Mic head, preamp, windshield and attachments |
 |  |  |  |
| Mic head and preamp with Kevlar cable | Mic capsule head and preamp | Cardioid Polar Pattern | Frequency Response |
|
|
|
|
|
)
)
)
)
)
)
)
)
